Taurus Stomp-Head 3.Black Line Taurus Stomp-Head 3.Black Line Taurus Stomp-Head 3.Black Line
On Sale
Taurus Amplification

Taurus Stomp-Head 3 Black Line

C $999.00 C $449.00 You save C $550.00!

FINAL CLEARANCE SALE!

Stomp-Head 3.Black Line

Ultra light analog guitar amplifier with tube simulation

New definition of guitar amps !!! Until today, guitarists could only choose between two types of amplifiers: heads and combos. Now, we are introducing a completely new breed: The Stomp-Head. It is a pure analog design with unprecedented light weight and small size. The amplifier can be placed either on a stage floor just beside the effects, in a traditional way on the top of the speaker cabinet or set up on an effect board. It features a built-in foot switches which allows fast channel and sound shape changes during the performance.  Now you will know how it's like to take your sound where ever you go! Stomp-Head 3.BL (3 foot-switches)

 Power output: 60W RMS with a power brake to 40W
2 channels: CLEAN and LEAD
3 different sounds: CLEAN, CRUNCH and DRIVE
3 foot-switches: CHANNEL [Clean/ Lead], CRUNCH, BOOST
Effect loop
LINE OUT with guitar speaker simulation
Power output selector
Speaker impedance selector: 4-8-16ohm
2 loudness mode: STUDIO / STAGE

 

The Stomp-Head 3.BL is an ultra light, very compact floor amplifier with integrated foot-switch, designed to be set on your pedal board, along with all of your effects or, placed directly on the stage floor. It greatly benefits the player with immediate access to all amps potentiometers When the amp is set on the pedal board only one wire (speaker wire) is needed to setup the guitar sound on stage. This amplifier can also be placed on a top of a cabinet like a regular head.
The Taurus SH-3.BL is a fully analog amplifier with a tube simulation. All transistor characteristic which could affect the sound are almost completely eliminated. Its details were carefully engineered and crafted to ensure the purest tube sound of the amplifier with the transformer output. Dynamic, compression and distortion characteristics are the same as in classical, high end tube amps. The sound is clean, punchy and saturated.

The amplifier features two (2) channels: Clean/Lead & Master section. Each channel can be independently selected by foot switch build-in to the amplifier. The sound of both channels is controlled through a three-point equalizer and volume potentiometers. While using the CLEAN channel, the over-driven CRUNCH sound can be selected via the food-switch and fluidly adjusted by potentiometer. The LEAD channel uses specially designed DRIVE circuitry to enrich harmonics and make the instrument’s sound characteristics even more vivid. This setup provides three different sounds under the player foot. The MASTER VOLUME and BOOST knobs shared by both channels can be found in the MASTER output section. The BOOST function allows a guitarist to mix his own stage sound. By pressing one of three switches on the top of the amp, obtain the two volume levels previously adjusted for chords or solos.The Stomp-Head amplifier is also equipped with a serial effect loop. The LINE OUT with a speaker cabinet simulator allows the connection of the amplifier to a mixer or an external power amp. Another special feature of the Stomp-Head is its power reduction switch which enables musicians to choose between a 60 or 40 Watts of power as well as a specially designed circuit which reduce the loudness of the amplifier while the full force of power stage is used. This function allows to use the amplifier at home or in studio on low level of loudness with the sound of fully cranked amp. Stomp head allows to use 4, 8 and 16 Ohm cabinet. The speaker impedance selector is placed on the back of the amplifier.

 

Full Description
Qty
  • Description

    FINAL CLEARANCE SALE!

    Stomp-Head 3.Black Line

    Ultra light analog guitar amplifier with tube simulation

    New definition of guitar amps !!! Until today, guitarists could only choose between two types of amplifiers: heads and combos. Now, we are introducing a completely new breed: The Stomp-Head. It is a pure analog design with unprecedented light weight and small size. The amplifier can be placed either on a stage floor just beside the effects, in a traditional way on the top of the speaker cabinet or set up on an effect board. It features a built-in foot switches which allows fast channel and sound shape changes during the performance.  Now you will know how it's like to take your sound where ever you go! Stomp-Head 3.BL (3 foot-switches)

     Power output: 60W RMS with a power brake to 40W
    2 channels: CLEAN and LEAD
    3 different sounds: CLEAN, CRUNCH and DRIVE
    3 foot-switches: CHANNEL [Clean/ Lead], CRUNCH, BOOST
    Effect loop
    LINE OUT with guitar speaker simulation
    Power output selector
    Speaker impedance selector: 4-8-16ohm
    2 loudness mode: STUDIO / STAGE

     

    The Stomp-Head 3.BL is an ultra light, very compact floor amplifier with integrated foot-switch, designed to be set on your pedal board, along with all of your effects or, placed directly on the stage floor. It greatly benefits the player with immediate access to all amps potentiometers When the amp is set on the pedal board only one wire (speaker wire) is needed to setup the guitar sound on stage. This amplifier can also be placed on a top of a cabinet like a regular head.
    The Taurus SH-3.BL is a fully analog amplifier with a tube simulation. All transistor characteristic which could affect the sound are almost completely eliminated. Its details were carefully engineered and crafted to ensure the purest tube sound of the amplifier with the transformer output. Dynamic, compression and distortion characteristics are the same as in classical, high end tube amps. The sound is clean, punchy and saturated.

    The amplifier features two (2) channels: Clean/Lead & Master section. Each channel can be independently selected by foot switch build-in to the amplifier. The sound of both channels is controlled through a three-point equalizer and volume potentiometers. While using the CLEAN channel, the over-driven CRUNCH sound can be selected via the food-switch and fluidly adjusted by potentiometer. The LEAD channel uses specially designed DRIVE circuitry to enrich harmonics and make the instrument’s sound characteristics even more vivid. This setup provides three different sounds under the player foot. The MASTER VOLUME and BOOST knobs shared by both channels can be found in the MASTER output section. The BOOST function allows a guitarist to mix his own stage sound. By pressing one of three switches on the top of the amp, obtain the two volume levels previously adjusted for chords or solos.The Stomp-Head amplifier is also equipped with a serial effect loop. The LINE OUT with a speaker cabinet simulator allows the connection of the amplifier to a mixer or an external power amp. Another special feature of the Stomp-Head is its power reduction switch which enables musicians to choose between a 60 or 40 Watts of power as well as a specially designed circuit which reduce the loudness of the amplifier while the full force of power stage is used. This function allows to use the amplifier at home or in studio on low level of loudness with the sound of fully cranked amp. Stomp head allows to use 4, 8 and 16 Ohm cabinet. The speaker impedance selector is placed on the back of the amplifier.

     

  • Reviews

    Reviews

    Be the first to

  • Details

    Details

    Current Stock:
    SKU: 3.bl
    Shipping: Calculated at Checkout