Taurus Stomp-Head 3.HG High Gain - 60Watt Ultra light analog guitar amplifier Master Tube Design
New definition of guitar amps!!!
Handmade in Poland
Until today, guitarists could only choose between two types of amplifiers: heads and combos. Now, we are introducing a completely new breed: The Stomp-Head.
The Stomp-Head 3.HG is an ultra light, very compact floor amplifier with integrated foot-switch designed to be set on the pedalboard along with effects or placed directly on the stage floor.
An amplifier-equipped pedalboard provides a complete ready-to-use sound system. Simply connect a speaker cabinet, guitar and power source, then the system is ready to go.
The amplifier can be also placed in a traditional way as a “Head” amp, on the top of the speaker cabinet.
SH-3.HG is equipped with power selector that allows to set 60Watt or 25Watt in STAGE MODE and 15Watt or 7Watt in STUDIO MODE. The amp is designed to work with 4, 8, and 16 ohm cabinets (Power Amp adjust itself automatically to speakers impedance)
The Stomp-Head can also be used as a guitar preamp, without connecting speaker cabinet.
The LINE OUT (with a Speaker Cabinet Simulation) allows connect the amplifier to a mixer or an external power amp. The Speaker Cabinet Simulation imitates sound of the 4 x12 CELESTION Vintage 30 cabinets. The amp is also equipped with a serial Effect Loop.
Stomp-Head 3.HG (3 footswitches)
60W or 25W / 4ohm, 8ohm,16ohm in STAGE MODE
15W or 7W / 4ohm, 8ohm,16ohm in STUDIO MODE
Power stage efficiency: 130Watt
Speakers impedance auto detection
2 channels: CLEAN and LEAD
3 footswitches: CHANNEL [Clean/ Lead], BOOST, MUTE
CHANNELS controls: (CLEAN & LEAD): GAIN, BASS, MIDDLE, MID-RANGE switch, TREBLE, PRESENCE, VOLUME and BOOST shared by both channels
Input GAIN boost (switch +6dB)
BOOST: immediate access to two different volume levels
Serial EFFECT LOOP
LINE OUTPUT with speaker simulationThe ability to send the linear signal with or without simulation or both at the same timeLINE OUTPUT with Speaker Simulation. Allows send linear signal with simulation (PIN) or without simulation (RING) or both simultaneously
INPUT for external channel selector/controller
AUX-INPUT allows connect an audio player or send monitor signal to the headphones.
The AUX signal is send only to the headphones, bypassing the speakers.
MIX-MODE both amps channels can be mixed and used simultaneously
Power Output selector STAGE / STUDIO
Dimensions: [H x W x Dl] 90 x 270 x 205 mm
Be the first to
Leave a Review
DetailsCurrent Stock:SKU: TAURUS3HGUPC: 0662187459868Shipping: Calculated at Checkout
Canadian Dollar (default)